ČSN EN ISO 472 - Plasty - Slovník
| Download standard: | ČSN EN ISO 472 (Show details) Customers who have agreed on their computer from ÚNMZ service CSN on-line-for electronic access to the full texts of standards in pdf (version for companies or individuals) may open directly quoted CSN here. | ||
| Changes: |
|
||
| Published: | 2015-10-01 | ||
| Source: | https://www.iso.org/obp/ui/#iso:std:iso:472:ed-4:v1:en | ||
| Classification symbol: | 640001 | ||
| Category: | Plasty. Všeobecně | ||
| ICS: |
|
||
| Status: | Valid |
- 2.1 accelerator, promoter
- 2.2 accuracy of the mean
- 2.4 acrylic plastic
- 2.5 acrylonitrile-butadiene-styrene plastic, ABS plastic
- 2.6 acrylonitrile-methyl methacrylate plastic, AMMA plastic
- 2.7 activator
- 2.8 addition polymer
- 2.9 addition polymerization
- 2.11 adhere
- 2.12 adherence
- 2.13 adherend
- 2.14 back draft, back taper, counterdraft, reverse taper
- 2.15 backing plate, support plate
- 2.16 baffle
- 2.17 bag moulding
- 2.18 bar mould
- 2.19 barrel, cylinder
- 2.20 bead polymerization, pearl polymerization
- 2.24 binder (2.24)
- 2.25 binder, binding agent (2.25)
- 2.28 blast finishing
- 2.29 blister
- 2.30 adhesion failure, adhesive failure
- 2.32 adhesive line, glue line (deprecated)
- 2.33 afterflame
- 2.34 afterflame time
- 2.35 afterglow
- 2.37 air-assist vacuum thermoforming
- 2.38 air-slip vacuum thermoforming
- 2.41 allyl polymer
- 2.43 alternating copolymer
- 2.47 amino resin
- 2.49 amorphous
- 2.50 amorphous regions
- 2.51 anaerobic adhesive
- 2.52 angle-head
- 2.54 aniline-formaldehyde resin
- 2.55 antiblocking agent
- 2.56 antioxidant
- 2.58 apparent density
- 2.60 area burning rate
- 2.63 assembling
- 2.64 assembly (2.64)
- 2.65 assembly time
- 2.66 A-stage
- 2.68 atactic polymer
- 2.70 autothermal extrusion, adiabatic extrusion
- 2.72 block
- 2.73 block copolymer
- 2.78 blocked curing agent
- 2.79 blocking
- 2.80 bloom
- 2.81 blow moulding
- 2.82 blowing agent
- 2.83.1 blow-up ratio (2.83.1)
- 2.83.2 blow-up ratio (2.83.2)
- 2.85 bond, noun
- 2.88 bond strength
- 2.89 boss
- 2.91 branch
- 2.92 branched polymer
- 2.94 breaker plate
- 2.97 breathing
- 2.99 brittleness temperature
- 2.100 B-stage
- 2.101 bulk compression, isotropic compression
- 2.102 bulk density
- 2.103 bulk factor
- 2.104 bulk modulus
- 2.105 bulk polymerization
- 2.106 burn, noun
- 2.107 burn, intransitive verb
- 2.108 burned area
- 2.109 burning behaviour
- 2.111 cabled yarn
- 2.112 calender
- 2.116 carbon fibre precursor
- 2.117 carboxymethyl cellulose, CMC
- 2.118 casein, CS
- 2.119 cast film
- 2.120 casting
- 2.121 casting resin
- 2.122 catalyst
- 2.126 cellular plastic, expanded plastic, foamed plastic
- 2.128 cellulose acetate, CA
- 2.129 cellulose acetate butyrate, CAB
- 2.130 cellulose acetate propionate, CAP
- 2.131 cellulose nitrate, CN
- 2.132 cellulose propionate, CP
- 2.133 cellulosic plastic
- 2.134 centrifugal casting
- 2.135 centrifugal moulding
- 2.137 chain transfer
- 2.138 chain-transfer polymerization
- 2.139 chalking
- 2.140 frame
- 2.141 chemically foamed plastic
- 2.142 chill-roll extrusion
- 2.145 chlorinated polyethylene, PE-C
- 2.146 chopped fibre
- 2.147 chopped-strand mat
- 2.148 chopped strands
- 2.149 closed-assembly time
- 2.150 closed cell
- 2.151 closed-cell cellular plastic
- 2.152 coated fabric
- 2.153 coating
- 2.154 coating process
- 2.156 coefficient of linear thermal expansion
- 2.157 coefficient of twist contraction
- 2.158 cohesion
- 2.159 cohesion failure, cohesive failure
- 2.161 cold drawing
- 2.162 cold moulding (2.162)
- 2.163 cold pressing (2.163)
- 2.164 cold setting
- 2.165 cold-setting adhesive, cold glue (deprecated)
- 2.166 cold-slug well, slug well
- 2.167 collapse, noun
- 2.168 colour bleeding
- 2.174 combination reinforcement
- 2.175 combustible, adjective
- 2.176 combustion
- 2.177 compatibility
- 2.178 complex compliance
- 2.179 complex modulus
- 2.182.1 composite (2.182.1)
- 2.182.2 composite (2.182.2)
- 2.183 composite mould
- 2.184 compound
- 2.185 compression moulding
- 2.186 compression-moulding pressure
- 2.187 compressive strain
- 2.192 condensation polymer, polycondensate
- 2.193 condensation polymerization, polycondensation
- 2.195 conditioning atmosphere
- 2.197 configurational repeating unit
- 2.198 configurational sequence
- 2.201 constitutional sequence
- 2.203 contact adhesive
- 2.204 contact moulding, contact pressure moulding
- 2.205 continuous-filament/staple-fibre woven fabric
- 2.206 continuous-filament woven fabric
- 2.207 continuous-strand mat
- 2.210 cooling jig, cooling fixture, shrinkage block, shrinkage jig
- 2.212 copolymer
- 2.216 cored screw
- 2.217 co-solvency
- 2.219 coupling agent
- 2.221 crack (2.221)
- 2.222 crater, pit
- 2.223 craze, crazing
- 2.224 creaming (2.224)
- 2.225 creaming (2.225)
- 2.227 creep (2.227)
- 2.229 cresol resin
- 2.230 cresol-formaldehyde resin, CF resin
- 2.231 crosshead
- 2.232 crosslink, verb
- 2.233 crosslink, noun
- 2.234 crosslinking
- 2.236 crosswise
- 2.237 crosswise laminate
- 2.238 crown
- 2.239 crystalline polymer
- 2.240 crystallinity
- 2.241 crystallite
- 2.242 C-stage
- 2.243 cure, noun, curing
- 2.244 cure, verb
- 2.245 cure temperature
- 2.246 cure time
- 2.247 curing agent
- 2.248 cut layers
- 2.249 cycle ratio
- 2.253 daylight
- 2.254 decay constant
- 2.255 decorative laminate
- 2.257 deflashing
- 2.258 temperature of deflection under load
- 2.259 deflocculation agent
- 2.261 degradable plastic
- 2.262 degradation
- 2.263 degree of polymerization
- 2.266 delamination
- 2.268 depolymerization
- 2.270 desized fibre
- 2.271 deterioration
- 2.272 die (2.272)
- 2.273 die (2.273)
- 2.274 die cutting
- 2.275 die plate
- 2.276 dielectric dissipation factor, dissipation factor, loss tangent, tangent of loss angle
- 2.278 differential scanning calorimetry, DSC
- 2.280 diffusion of light
- 2.281 diluent, thinner (deprecated)
- 2.282 dimensional stability
- 2.283 dimer (2.283)
- 2.284 dip coating
- 2.287 dished
- 2.288 dispersion
- 2.293 domed
- 2.298 dowel bush, dowel bushing
- 2.299 downstroke press
- 2.300 draft
- 2.301 drape vacuum thermoforming
- 2.302 draw ratio
- 2.303 draw-down ratio
- 2.304 drawing
- 2.305 dry blend
- 2.306 dry patch, dry spot
- 2.307 dry strength
- 2.308 dry tack, aggressive tack
- 2.309 drying temperature
- 2.310 drying time
- 2.311 dwell, noun, dwelling
- 2.314 dynamic mechanical analysis, DMA
- 2.317 dynamic thermomechanical measurement
- 2.321 edgewise
- 2.322 ejection
- 2.323 ejector
- 2.327 elastomer
- 2.328 electric strength, dielectric strength
- 2.331 embedding (in a polymer)
- 2.332 embossed sheet
- 2.333 embossing
- 2.334 emulsifying agent, emulsifier, dispersant
- 2.335 emulsion
- 2.336 emulsion polymerization
- 2.338 encapsulated adhesive
- 2.339 encapsulation
- 2.340 end group
- 2.345 evolved-gas analysis EGA
- 2.346 evolved-gas detection EGD
- 2.349 extender
- 2.353 external plasticizer
- 2.354 extruder head
- 2.355 extruder screw
- 2.356 extrusion
- 2.357 extrusion coating
- 2.358 exudation, bleed-out (deprecated), sweat-out (deprecated)
- 2.360 fancy yarn, novelty yarn
- 2.362 fatigue life, fatigue strength
- 2.366 feeding
- 2.367 fibre streak, fibre whitening
- 2.368 filament winding
- 2.369 filler
- 2.370 filler rod
- 2.371 filler sheet
- 2.372 fillet
- 2.373 film
- 2.374 film adhesive
- 2.375 film blowing
- 2.376 film casting
- 2.377 film extrusion
- 2.379 finishing
- 2.380 fire resistance
- 2.382 fish-eye (2.382)
- 2.384 flaking (2.384)
- 2.385 flame, noun
- 2.386 flame, verb
- 2.387 flame retardance
- 2.388 flame retardant, noun
- 2.389 flame spray coating
- 2.390 flame spread
- 2.391 flame spread rate
- 2.392 flame spread time
- 2.393 flammability
- 2.394 flammable
- 2.395 flash
- 2.396 flash groove, spew groove
- 2.397 flash line, spew line
- 2.398 flash mould
- 2.399 flash ridge, flash area, spew area, spew ridge
- 2.400 flatwise
- 2.404 flexural strength
- 2.406 floating platen
- 2.408 flow line
- 2.409 fluidized-bed coating
- 2.410 fluoroplastic
- 2.411 force (2.411)
- 2.412 foam in situ, verb, foam in place, verb
- 2.413 foaming adhesive
- 2.414 folded-chain crystal
- 2.415 folded yarn, plied yarn
- 2.416 forming
- 2.417 fractionation
- 2.421 friction welding, spin welding
- 2.425 furan plastic
- 2.426 furan resin
- 2.427 furfural resin
- 2.429 gap
- 2.430 gas transmission rate
- 2.432 gauge length (2.432)
- 2.433 gauge marks
- 2.435 gel coat
- 2.436 gel point
- 2.437 gel strength
- 2.440 glass transition
- 2.441 glass transition temperature
- 2.442 veil
- 2.444 glowing combustion
- 2.449 granulator
- 2.450 granule
- 2.452 hardening agent, hardener
- 2.454 haze
- 2.455 heat-activated adhesive
- 2.456 heat of combustion
- 2.458 heat sealing
- 2.459 heater band, heater blanket, heater strip
- 2.460 heating-curve determination
- 2.461 high-frequency welding
- 2.463 high-pressure decorative laminate, HPDL, high-pressure laminate, HPL
- 2.464 high-pressure moulding
- 2.465 homopolymer
- 2.467 hopper
- 2.468 hot-gas welding
- 2.469 hot-melt adhesive
- 2.470 hot-runner mould
- 2.471 hot-setting adhesive
- 2.472 hot stamping
- 2.473 hybrid (2.473)
- 2.477 ignition
- 2.478 ignition temperature
- 2.479 impact strength (2.479)
- 2.481 impregnation
- 2.483 impulse sealing, thermal-impulse sealing
- 2.484 incandescence
- 2.486 ball indentation hardness
- 2.487 inherent viscosity, logarithmic viscosity number
- 2.488 inhibitor (2.488)
- 2.490 initiator
- 2.491 injection blow moulding
- 2.492 injection moulding
- 2.494 inorganic polymer
- 2.496 insert
- 2.497 insert pin
- 2.499 insulation resistance
- 2.503 intrinsic viscosity, limiting viscosity number
- 2.509 isocyanate polymer
- 2.511 isothermal mass-change determination
- 2.512 joint
- 2.513 kiss roll
- 2.514 kneader
- 2.515 knitted fabric
- 2.517 lamellar crystal
- 2.518 laminate, verb
- 2.524 laminating, lamination
- 2.525 lamination
- 2.526 land, land area, mating surface
- 2.527 land
- 2.528 lap joint
- 2.529 latex
- 2.530 lay-up, noun
- 2.531 lay up, verb
- 2.533 let-go area
- 2.534 let-off device, pay-off device
- 2.537 lignin resin
- 2.539 linear burning rate
- 2.540 linear chain
- 2.541 pilot(ed) ignition
- 2.542 combustion products
- 2.545 linear expansion
- 2.549 loading chamber
- 2.551 logarithmic decrement
- 2.555 longitudinal wave modulus
- 2.557 loss factor, tan delta
- 2.559 loss modulus
- 2.560 lot
- 2.561 low-pressure moulding
- 2.562 lubricant
- 2.563 lubricant bloom
- 2.565 macrocycle
- 2.566 macromere
- 2.567 macromolecule
- 2.569 mandrel
- 2.570 Mark-Houwink equation, Mark-Houwink-Sakurada equation, MHS equation
- 2.571 mass-distribution function
- 2.572 mass burning rate
- 2.574 masterbatch
- 2.576 matt spot
- 2.579 mechanically foamed plastic
- 2.580 melamine-formaldehyde resin, MF resin
- 2.581 melamine plastic
- 2.582 melt flow rate
- 2.583 melting behaviour
- 2.584 melting temperature
- 2.585 metallized plastic
- 2.586 metering device
- 2.587 metering zone
- 2.588 micro-encapsulation
- 2.589 microgel
- 2.590 migration
- 2.591 milled fibres
- 2.592 minimum film-forming temperature
- 2.593 minimum ignition time
- 2.597 molar mass
- 2.598 average molar mass, average relative molecular mass
- 2.599 molecular-mass distribution
- 2.600 poly(diallyl phthalate), PDAP
- 2.601 polyelectrolyte
- 2.604 polyether
- 2.605 polyetheretherketone, PEEK
- 2.606 polyethersulfone, PESU
- 2.608 poly(ethylene oxide), PEOX
- 2.610 poly(ethylene terephthalate), PET
- 2.611 recrystallization
- 2.612 recycled plastic
- 2.613 reduced viscosity, viscosity number
- 2.615 regenerated cellulose
- 2.616 regular block
- 2.617 regular polymer
- 2.618 regulator
- 2.620 reinforced-reaction injection moulding, RRIM
- 2.623 monofilament
- 2.624 monomer
- 2.625 monomeric unit, mer
- 2.626 mould die
- 2.627 mould clamping force, mould locking force, mould locking pressure
- 2.628 mould mark
- 2.629 mould seam
- 2.630 moulding (2.630)
- 2.631 moulding (2.631)
- 2.632 moulding compound
- 2.633 moulding cycle
- 2.634 moulding pressure
- 2.635 moulding shrinkage
- 2.636 moving plate, moving table
- 2.637 multicavity mould, multi-impression mould, gang mould
- 2.638 multifilament
- 2.639 multi-gated cavity
- 2.640 multiplaten press, multidaylight press
- 2.641 multiple wound yarn
- 2.643 narrow fabric
- 2.645 necking, striction
- 2.646 needled mat
- 2.647 network
- 2.648 network polymer
- 2.650 nip
- 2.651 nominal diameter
- 2.652 non-resonant forced-vibration technique
- 2.653 non-rigid plastic
- 2.654 non-uniform polymer, polydisperse polymer
- 2.655 non-woven scrim
- 2.658 no-twist roving (for over-end unwinding)
- 2.659 novolak (2.659)
- 2.660 nozzle
- 2.661 nucleation
- 2.664 oligomer (2.664)
- 2.667 on torque
- 2.668 open assembly time, open time
- 2.669 open cell
- 2.670 open-cell cellular plastic
- 2.671 optical density
- 2.672 optical distortion
- 2.673 orange peel
- 2.674 organosol
- 2.677 overcure
- 2.678 oxidatively degradable plastic
- 2.681 parallel-laminated
- 2.682 parison
- 2.683 peel strength, peel adhesion, peel resistance
- 2.684 pellet
- 2.685 pelletizer
- 2.686 perfluoro(ethylene/propylene) plastic, FEP plastic
- 2.687 periodic copolymer
- 2.690 permeability
- 2.691 phase inversion
- 2.692 phenol-formaldehyde resin, PF resin
- 2.693 phenol-furfural resin
- 2.698 pinhole
- 2.699 pin-point gate
- 2.700 pipe
- 2.701 pitch-based carbon fibre
- 2.702 plastic, noun
- 2.705 plasticating capacity
- 2.706 plasticity
- 2.707 plasticize
- 2.708 plasticizer
- 2.709 plasticizer limit
- 2.710 plastigel
- 2.711 plastisol
- 2.712 plastisol fusion
- 2.713 plate
- 2.714 plate mark
- 2.715 plug-assist vacuum thermoforming
- 2.717 polyacetal
- 2.721 polyacrylonitrile, PAN
- 2.723 polyallyl plastic, allyl plastic, allyl resin
- 2.726 polyaryletherketone, PAEK
- 2.727 polybuten, PB
- 2.729 poly(butylene terephthalate), PBT
- 2.730 polycarbonate, PC
- 2.732 polychlorofluorocarbon plastic, chlorofluorocarbon plastic
- 2.733 polychlorofluorohydrocarbon plastic, chlorofluorohydrocarbon plastic
- 2.734 polychlorotrifluoroethylene, PCTFE
- 2.735 polyfluorocarbon plastic, fluorocarbon plastic
- 2.736 polyfluorohydrocarbon plastic, fluorohydrocarbon plastic
- 2.737 polyhalocarbon plastic, halocarbon plastic
- 2.738 polyhydrocarbon plastic, hydrocarbon plastic
- 2.740 polyisocyanurate plastic, isocyanurate plastic
- 2.744 polymerization
- 2.745 polymer-poor phase, dilute phase
- 2.746 polymer-rich phase, concentrated phase
- 2.747 poly(methyl methacrylate), PMMA
- 2.756 poly(phenylene sulfide), PPS
- 2.757 poly(phenylene sulfone), PPSU
- 2.760 thermal-insulation criterion “I”
- 2.761 thermal radiation
- 2.762 lethal exposure time 50
- 2.763 toxic hazard
- 2.764 toxic potency
- 2.765 toxic risk
- 2.766 toxicant
- 2.767 toxicity
- 2.768 tracking resistance
- 2.769 transitory flaming
- 2.770 transmittance
- 2.771 puncture energy
- 2.772 type of failure
- 2.774 phase angle
- 2.775 stress-strain hysteresis loop
- 2.780 complex shear viscosity
- 2.781 dynamic shear viscosity
- 2.782 out-of-phase component of the complex shear viscosity
- 2.784 tensile-impact strength
- 2.785 abrasive wheel
- 2.786 abrasive wear
- 2.787 single-point data
- 2.788 specimen coordinate axes
- 2.789 multipoint data
- 2.790 indicative property
- 2.792 poly(propylene oxide), PPOX
- 2.795 styrene-acrylonitrile plastic
- 2.796 polytetrafluoroethylene, PTFE
- 2.799 polyurea
- 2.806 polyvinylcarbazole, PVK
- 2.809 poly(vinyl chloride-vinyl acetate), PVC/PVAC
- 2.810 poly(vinyl fluoride), PVF
- 2.813 poly(vinylidene chloride) plastic, PVDC plastic
- 2.814 poly(vinylidene fluoride), PVDF
- 2.815 poly(vinyl pyrrolidone), PVP
- 2.817 porosity
- 2.818 positive mould
- 2.820 postforming
- 2.821 post-shrinkage
- 2.823 potting
- 2.824 powder moulding
- 2.827 precision
- 2.828 preform, noun
- 2.829 premix
- 2.830 prepreg
- 2.831 prepolymer
- 2.832 pressure break
- 2.833 pressure pad
- 2.834 pressure-sensitive adhesive
- 2.835 pressure thermoforming
- 2.836 pressure welding
- 2.838 primer (2.838)
- 2.839 profile
- 2.841 pull-back ram
- 2.844.1 punch (2.844.1)
- 2.844.2 punch (2.844.2)
- 2.845 purging
- 2.850 radical polymerization
- 2.851 ram, piston
- 2.852 random copolymer
- 2.854 burning rate (deprecated), rate of burning (deprecated)
- 2.855 reaction injection moulding, RIM
- 2.856 reactive diluent
- 2.859 relative permittivity, dielectric constant (relative)
- 2.861 relative viscosity, viscosity ratio, solution/solvent viscosity ratio
- 2.862 relative viscosity increment, viscosity ratio increment
- 2.864 release agent (2.864)
- 2.865 relieve
- 2.866 repeatability
- 2.867 reproducibility
- 2.868 reprocessed plastic
- 2.870 resin
- 2.871 resin pocket
- 2.872 resin streak
- 2.873 resistance to chemicals, chemical resistance
- 2.874 resite
- 2.875 resitol
- 2.876 resol
- 2.881 retarder
- 2.882 reverse roll
- 2.883 reworked plastic
- 2.884 rigid plastic
- 2.886 ring gate
- 2.887 ring-opening polymerization
- 2.888 rise time
- 2.889 roll coating
- 2.893 rotary moulding
- 2.894 rotational casting
- 2.895 rotational moulding
- 2.898 runner
- 2.899 sample
- 2.900 scarf joint
- 2.901 screen pack, filter pack
- 2.902 seam welding
- 2.903 seizing
- 2.904 selective solvent
- 2.905 self-extinguishing
- 2.907 semi-crystalline polymer
- 2.908 semi-positive mould
- 2.909 semi-rigid plastic
- 2.912 set, noun
- 2.913 setting
- 2.914 setting temperature
- 2.915 setting time (2.915)
- 2.916 setting time (2.916)
- 2.917 sewing thread
- 2.918 shear modulus, modulus of elasticity in shear
- 2.921.1 shear strength (2.921.1)
- 2.921.2 shear strength (2.921.2)
- 2.923 sheet, sheeting
- 2.924 sheeter line, knife line
- 2.926 shelf life, storage life
- 2.927 shell moulding resin
- 2.929 short
- 2.932 shot
- 2.933 shot capacity
- 2.934 shrink packaging, shrink wrapping
- 2.935 shrinkage
- 2.937 sieve retention
- 2.938 silicone plastic, Si plastic
- 2.939 single-strand chain
- 2.940 single spun yarn
- 2.941 sink mark shrink mark
- 2.948 slip thermoforming
- 2.949 slippage
- 2.950 slitting
- 2.951 slit-die extrusion, slot-die extrusion
- 2.952 slush casting, slush moulding
- 2.953 smoke
- 2.954 smouldering
- 2.957 Vicat softening temperature
- 2.960 solution polymerization
- 2.961 solvent-activated adhesive
- 2.962 solvent bonding, solvent welding
- 2.963 solvent polishing
- 2.964 test specimen
- 2.966 spherulite
- 2.967 split mould
- 2.968 spontaneous combustion
- 2.969 spontaneous-ignition temperature
- 2.971 spray
- 2.972 spray gun
- 2.973.1 spray-up (2.973.1)
- 2.973.2 spray-up (2.973.2)
- 2.975.1 sprue (2.975.1)
- 2.975.2 sprue (2.975.2)
- 2.976 sprue bush, sprue bushing
- 2.977 sprue lock
- 2.978 sprue-puller, anchor
- 2.979 spun roving
- 2.980 stabilizer
- 2.982 staple fibre, discontinuous fibre
- 2.983 staple-fibre woven fabric
- 2.986 star polymer
- 2.987 starved joint
- 2.990 statistical copolymer
- 2.992 stereoblock
- 2.993 stereoblock polymer
- 2.994 stereoregular polymer
- 2.996 stereoselective polymerization
- 2.997 stereospecific polymerization
- 2.998 storage modulus
- 2.1001 strain rate
- 2.1002 strand
- 2.1003 streaming birefringence, flow birefringence
- 2.1005 stress amplitude
- 2.1006 stress crack
- 2.1008 reinforcement
- 2.1011 desized product
- 2.1013 filament
- 2.1014 linear density
- 2.1015 mass per unit area
- 2.1018 mouldability
- 2.1021 size
- 2.1026 web
- 2.1027 yarn
- 2.1031 combustible-matter content
- 2.1034 direct roving
- 2.1036 roving
- 2.1037 sliver
- 2.1039 textile glass
- 2.1040 textile glass multifilament product
- 2.1041 textile glass staple-fibre product
- 2.1042 texturized yarn
- 2.1043 carbonization
- 2.1044 felt
- 2.1047 untreated fibre
- 2.1050 gel temperature
- 2.1051 annealing (2.1051)
- 2.1052 spreader
- 2.1053 cross-laminating cross-banding
- 2.1055 bulk moulding compound, BMC
- 2.1061 fibre volume content
- 2.1062 flowability
- 2.1064 low shrink
- 2.1068 overall volume shrinkage
- 2.1069 pre-impregnated roving
- 2.1071 fish-eye
- 2.1073 pre-impregnated fabric
- 2.1075 pressing time (2.1075)
- 2.1076 pultruded sections
- 2.1077 reactivity
- 2.1078 reinforcement layer
- 2.1082 shelf life
- 2.1084 thick moulding compound, TMC
- 2.1085 unidirectional prepreg
- 2.1088 shear stress
- 2.1089 surface tension
- 2.1091 pick-up roller
- 2.1092 applicator roller
- 2.1094 shortness, short-breaking
- 2.1095 stringiness, legging
- 2.1097 yield stress
- 2.1098 breaking force
- 2.1099 longitudinal shear strength, lap joint strength
- 2.1106 static shear strength
- 2.1114 stress ratio
- 2.1117.1 stretch ratio (2.1117.1)
- 2.1117.2 stretch ratio (2.1117.2)
- 2.1119 stripper plate
- 2.1121 stroke, noun
- 2.1122 structural adhesive
- 2.1123 structural foam moulding
- 2.1124 structure with twist
- 2.1125 styrene/(-methylstyrene plastic, S/MS plastic
- 2.1126 styrene-rubber plastic
- 2.1128 substrate
- 2.1129 surface burn
- 2.1130 surface resistance
- 2.1131 surface resistivity
- 2.1132 surface tack
- 2.1133 surface treatment, prebond treatment (deprecated)
- 2.1134 surfacing mat
- 2.1135 suspension
- 2.1136 suspension polymerization
- 2.1137 syneresis
- 2.1138 swelling
- 2.1140 syntactic cellular plastic
- 2.1142 tactic block
- 2.1143 tactic block polymer
- 2.1144 tactic polymer
- 2.1145 tacticity
- 2.1146 take-off
- 2.1147 take-up
- 2.1148 tape
- 2.1150 tear, verb
- 2.1151 tear propagation force
- 2.1152 tear propagation resistance
- 2.1153 tear strength, tear resistance
- 2.1154 telomere
- 2.1156 tensile strength
- 2.1157 terpolymer
- 2.1160 thermal analysis
- 2.1164 thermal diffusivity
- 2.1165 thermal expansion
- 2.1166 thermal stability
- 2.1167 thermally foamed plastic
- 2.1169 thermodilatometry
- 2.1170 thermoelasticity
- 2.1172 thermoforming
- 2.1173 thermogravimetry, TG
- 2.1175 thermomechanical measurement
- 2.1177 thermoplastic,
- 2.1178 thermoplastic, noun
- 2.1179 thermoplastic elastomer
- 2.1181 thermoset, noun
- 2.1183 thermosetting, adjective
- 2.1184 thermosetting plastic
- 2.1186 thickener
- 2.1187 thiourea-formaldehyde resin
- 2.1189 torpedo
- 2.1192 total volume shrinkage
- 2.1194 tow, noun
- 2.1196 transfer chamber, transfer pot
- 2.1197 transfer moulding
- 2.1198 transfer-moulding pressure
- 2.1199 translucency
- 2.1200 transparency
- 2.1201 trimer
- 2.1202 triple-skin sheet, TSS
- 2.1203 true stress
- 2.1205 tubing
- 2.1206 tubing (2.1206)
- 2.1207 tumble polishing, barrel polishing
- 2.1208 turbidity
- 2.1209 ultrasonic welding
- 2.1210 undercure
- 2.1211 undercut, noun
- 2.1212 unidirectional fabric
- 2.1213 uniform polymer, monodisperse polymer
- 2.1216 unsaturated polyester, UP
- 2.1217 upstroke press
- 2.1219 urea plastic
- 2.1220 urethane plastic
- 2.1222 vacuum snap-back thermoforming, snap-back thermoforming
- 2.1223 vacuum thermoforming
- 2.1224 veneer
- 2.1225 vent
- 2.1227 vinyl acetate plastic
- 2.1228 vinyl chloride plastic
- 2.1229 vinyl resin
- 2.1230 vinylidene chloride plastic
- 2.1231 virgin plastic
- 2.1232 viscoelasticity
- 2.1237 visible fibre, fibre show
- 2.1238 void (2.1238)
- 2.1239 void (2.1239)
- 2.1240 volume expansion
- 2.1241 volume resistance
- 2.1243 volumetric feeding
- 2.1244 vulcanized fibre
- 2.1245 warp, noun, warping
- 2.1246 water absorption, moisture absorption
- 2.1247 wear, noun
- 2.1250 weight feeding
- 2.1251 weld line, knit line, weld mark
- 2.1252 welding
- 2.1253 wet strength
- 2.1254 whisker
- 2.1255 “white point” temperature
- 2.1257 window
- 2.1259 woven roving
- 2.1260 woven scrim
- 2.1261 xylenol resin
- 2.1263 yield point
- 2.1264 Young’s modulus, modulus of elasticity in tension
- 2.1265 zone
- 2.1266 oxygen index, OI
- 2.1267 flame front
- 2.1268 flash point
- 2.1269 afterglow time
- 2.1270 arc resistance
- 2.1271 ash, ashes
- 2.1272 assembly (2.1272)
- 2.1273 burned length
- 2.1274 bursting
- 2.1275 sensory irritancy
- 2.1276 small-scale test
- 2.1277 smoke obscuration
- 2.1278 soot
- 2.1279 specific optical density of smoke
- 2.1280 spontaneous ignition
- 2.1281 surface flash
- 2.1282 surface spread of flame
- 2.1283 sustained flaming
- 2.1284 temperature-time curve
- 2.1285 thermal decomposition
- 2.1286 indicative data
- 2.1287 tensile work to break
- 2.1288 energy release rate (2.1288)
- 2.1290 stress intensity factor
- 2.1291 calorific value
- 2.1292 char, noun
- 2.1293 char,verb
- 2.1294 char length
- 2.1295 chimney effect
- 2.1296 clinker
- 2.1297 combustible, noun
- 2.1299 corrosion damage
- 2.1300 corrosion target
- 2.1301 damaged area
- 2.1302 damaged length
- 2.1303 deflagration
- 2.1304 detonation
- 2.1305 draught-free environment
- 2.1306 duration of flaming
- 2.1307 “E” criterion
- 2.1308 electrical tracking resistance
- 2.1309 end-use conditions
- 2.1310 environment
- 2.1311 explosion
- 2.1312 exposure time
- 2.1313 fire
- 2.1314 fire (2.1314)
- 2.1315 fire barrier
- 2.1316 fire behaviour
- 2.1317 fire compartment
- 2.1318 fire effluent
- 2.1319 fire exposure
- 2.1320 fire gases
- 2.1321 fire hazard
- 2.1322 fire load
- 2.1323 fire load density
- 2.1324 fire model
- 2.1325 physical fire model
- 2.1326 numerical fire model
- 2.1327 fire performance
- 2.1328 fire point
- 2.1329 fire retardant, noun
- 2.1330 fire risk
- 2.1331 fire scenario
- 2.1332 fire simulation
- 2.1333 flame-retardant treatment
- 2.1334 flame-retarded
- 2.1335 flaming combustion
- 2.1336 flaming debris, flaming droplets
- 2.1337 flash-over
- 2.1338 flashing
- 2.1339 full fire development
- 2.1340 fully developed fire
- 2.1341 gasification
- 2.1342 gasify
- 2.1343 glowing
- 2.1344 heat flux
- 2.1345 effective heat of combustion
- 2.1346 gross heat of combustion
- 2.1347 net heat of combustion
- 2.1348 heat release
- 2.1349 heat release rate
- 2.1350 heat stress
- 2.1351 “I” criterion
- 2.1352 ignitability
- 2.1353 ignitable
- 2.1354 ignite, transitive verb
- 2.1355 ignited, adjective
- 2.1356 ignition source
- 2.1357 imposed load
- 2.1358 integrity
- 2.1359 integrity criterion “E”
- 2.1360 intermediate-scale test
- 2.1361 irritant, noun
- 2.1362 lethal concentration 50
- 2.1363 large-scale test
- 2.1364 lethal exposure dose 50
- 2.1365 light, transitive verb
- 2.1367 lighted, adjective, lit, adjective, alight, adjective
- 2.1368 lighting, noun
- 2.1369 load-bearing criterion “R”
- 2.1370 high-density polyethylene, PE-HD
- 2.1371 low-density polyethylene, PE-LD
- 2.1372 linear low-density polyethylene, PE-LLD
- 2.1373 medium-density polyethylene, PE-MD
- 2.1374 ultra-high-molecular-weight polyethylene, PE-UHMW
- 2.1375 very-low-density polyethylene, PE-VLD
- 2.1379 atactic polypropylene
- 2.1380 polypropylene copolymer
- 2.1381 polypropylene random copolymer
- 2.1383 mass loss rate
- 2.1384 molten drips, noun
- 2.1385 narcosis
- 2.1386 narcotic
- 2.1387 non-combustible
- 2.1388 non-flammable
- 2.1389 opacity
- 2.1390 flameproof
- 2.1391 pulmonary irritancy
- 2.1392 pyrolysis
- 2.1394 “R” criterion
- 2.1396 reaction to fire
- 2.1397 real-scale test
- 2.1398 scorch, verb
- 2.1399 screening test
- 2.1400 self-extinguishability
- 2.1401 self-propagation of flame
- 2.1402 self-ignition
- 2.1403 self-ignition temperature (deprecated)
- 2.1404 ultimate stability failure
- 2.1405 wicking
- 2.1406 flexural stress
- 2.1407 flexural strain
- 2.1408 flexural-strain increase
- 2.1409 deflection (2.1409)
- 2.1410 standard deflection
- 2.1411 load
- 2.1413 conventional deflection
- 2.1416 modulus of elasticity in flexure, flexural modulus
- 2.1417 Charpy unnotched impact strength
- 2.1418 Charpy notched impact strength
- 2.1419 edgewise impact
- 2.1420 flatwise impact
- 2.1421 normal impact
- 2.1422 parallel impact
- 2.1423 Izod unnotched impact strength
- 2.1424 Izod notched impact strength
- 2.1425 impact velocity
- 2.1426 inertial peak
- 2.1427 impact force
- 2.1428 impact energy
- 2.1429 maximum impact force
- 2.1430 deflection at maximum impact force
- 2.1431 energy to maximum impact force
- 2.1432 deflection at break
- 2.1433 impact energy at break
- 2.1434 type of failure (2.1434)
- 2.1435 test speed, speed of testing
- 2.1436 tensile stress
- 2.1440 tensile strain
- 2.1441 nominal tensile strain
- 2.1443 modulus of elasticity in tension, tensile modulus
- 2.1447 nominal compressive strain
- 2.1451 modulus of elasticity in compression; compressive modulus
- 2.1452 initial stress
- 2.1454 nominal extension
- 2.1455 tensile-creep strain
- 2.1456 isochronous stress-strain curve
- 2.1457 tensile-creep modulus
- 2.1458 time to rupture
- 2.1459 creep-strength limit
- 2.1460 recovery from creep, creep recovery
- 2.1461 flexural-creep modulus
- 2.1463 failure
- 2.1464 break
- 2.1465 penetration
- 2.1466 shattering
- 2.1467 impact-failure energy
- 2.1468 impact-failure mass
- 2.1469 impact-failure height
- 2.1470 force (2.1470)
- 2.1471 puncture deflection
- 2.1473 water-borne adhesive, aqueous adhesive
- 2.1476 displacement
- 2.1477 stiffness
- 2.1478 energy (2.1478)
- 2.1480 energy calibration factor
- 2.1481 geometry calibration factor
- 2.1482 characteristic length
- 2.1483 verification of an instrument (2.1483)
- 2.1484 calibration
- 2.1485 period of oscillation of pendulum
- 2.1486 centre of percussion
- 2.1487 pendulum length
- 2.1488 gravity length
- 2.1489 gyration length
- 2.1490 impact length
- 2.1491 starting angle
- 2.1492 potential energy of pendulum
- 2.1497 cycle
- 2.1499 maximum load
- 2.1500 minimum load
- 2.1501 load range
- 2.1502 load ratio, stress ratio
- 2.1503 maximum stress intensity factor
- 2.1504 minimum stress intensity factor
- 2.1505 stress intensity factor range
- 2.1506 maximum energy release rate
- 2.1507 minimum energy release rate
- 2.1508 energy release rate (2.1508)
- 2.1509 notch
- 2.1510 initial crack length
- 2.1511 crack length (2.1511)
- 2.1512 fatigue crack growth rate
- 2.1514 gauge length (2.1514)
- 2.1515 paste adhesive
- 2.1516 dispersion adhesive
- 2.1517 emulsion adhesive
- 2.1518 solvent-borne adhesive, solution adhesive, solvent-based adhesive
- 2.1519 solvent-free adhesive
- 2.1520 plastisol adhesive
- 2.1521 toughened adhesive
- 2.1522 spray adhesive
- 2.1523 gap-filling adhesive
- 2.1524 sealant
- 2.1525 unsupported-film adhesive
- 2.1526 supported-film adhesive
- 2.1527 adhesive tape
- 2.1528 transfer tape
- 2.1529 double-coated adhesive tape, double-sided adhesive tape
- 2.1531 one-way-stick adhesive
- 2.1532 separate-application adhesive
- 2.1533 two-way-stick adhesive, double-spread adhesive
- 2.1535 two-part adhesive
- 2.1536 multi-part adhesive
- 2.1537 heat-sealing adhesive
- 2.1538 reaction adhesive, reactive adhesive
- 2.1539 cold-curing adhesive
- 2.1541 self-curing adhesive
- 2.1542 moisture curing adhesive
- 2.1543 conductive adhesive
- 2.1545 synthetic resin
- 2.1548 adhesion promoter, coupling agent
- 2.1549 plasticizer, external plasticizer
- 2.1550 solvent
- 2.1551 matrix
- 2.1552 modifier
- 2.1553 tackifier
- 2.1554 soluble silicate
- 2.1556 protein
- 2.1560 dextrin(e)
- 2.1563 gum
- 2.1565 terpene resin
- 2.1567 tall resin
- 2.1568 rosin, colophony
- 2.1571 chlorinated rubber
- 2.1573 bitumen, asphalt
- 2.1574 wax (synthetic)
- 2.1576 coumarone-indene resin
- 2.1577 chlorosulfonated polyethylene, CSM
- 2.1579 polymethacrylate
- 2.1580 cyanoacrylate monomer
- 2.1581 acrylonitrile-butadiene rubber, nitrile rubber, nitrile-butadiene, NBR
- 2.1585 chloroprene rubber, CR, polychloroprene
- 2.1587 epoxy resin
- 2.1588 polysulfide
- 2.1592 non-Newtonian liquid, non-ideal liquid
- 2.1593 kinematic viscosity
- 2.1596 shear thickening
- 2.1597 dilatancy
- 2.1598 shear thinning
- 2.1599 pseudoplasticity
- 2.1600 thixotropy
- 2.1601 softening point
- 2.1602 retrogradation
- 2.1603 tack
- 2.1604 tack force
- 2.1605 tack range, tack time, tack life
- 2.1606 bonding range, bonding life
- 2.1607 wettability
- 2.1608 carrier
- 2.1609 release paper
- 2.1610 bondability
- 2.1611 equilibrium moisture content
- 2.1612 bonding surface faying surface
- 2.1613 surface preparation, surface pretreatment
- 2.1614 surface cleaning
- 2.1615 mechanical surface preparation
- 2.1617 priming
- 2.1618 sealing, sizing
- 2.1619 release agent (2.1619)
- 2.1621 specific adhesion
- 2.1622 mechanical adhesion
- 2.1623 adhesive coat
- 2.1624 adhesive film
- 2.1625 spread of adhesive, coverage
- 2.1626 wet bonding
- 2.1627 activation, reactivation
- 2.1628 solvent activation, solvent reactivation
- 2.1629 heat activation, heat reactivation
- 2.1630 clamp, verb
- 2.1631 press, verb
- 2.1632 air pressing
- 2.1633 vacuum pressing
- 2.1634 slip-sheet, interliner
- 2.1635 heat reactivator
- 2.1637 sagging
- 2.1638 throwing
- 2.1639 staining
- 2.1641 pinking
- 2.1643 double-lap joint
- 2.1644 edge joint
- 2.1645 lamination
- 2.1646 parallel laminate
- 2.1647 sandwich panel
- 2.1648 application time
- 2.1649 minimum open time
- 2.1650 maximum open time
- 2.1651 pressing time (2.1651)
- 2.1652 clamping time
- 2.1653 conditioning time
- 2.1654 adhesion
- 2.1655 cleavage
- 2.1656 peel mode, peeling mode (2.1656)
- 2.1657 shear mode
- 2.1658 tension mode
- 2.1659 strain
- 2.1660 cleavage strength
- 2.1661 impact strength (2.1661)
- 2.1662 heat strength
- 2.1663 green strength
- 2.1664 handling strength
- 2.1666 accelerated-ageing test
- 2.1667 environmental test
- 2.1668 fracture pattern
- 2.1669 adherend failure
- 2.1671 water-resistant, waterproof (deprecated)
- 2.1672 structural bond
- 2.1673 cold flow
- 2.1674 creep (2.1674)
- 2.1675 strike-through, bleed-through
- 2.1677 agglomerate
- 2.1678 baling
- 2.1679 batch
- 2.1680 biodegradation
- 2.1681 biological recycling
- 2.1682 collection
- 2.1683 commingled plastics
- 2.1684 contaminant
- 2.1685 converter
- 2.1687 energy recovery
- 2.1688 environmental aspect
- 2.1689 environmental impact
- 2.1690 feedstock recycling
- 2.1691 flake
- 2.1692 fluff
- 2.1693 homogenizing
- 2.1694 landfill
- 2.1696 material recovery
- 2.1697 mechanical recycling
- 2.1698 micronization, micronizing
- 2.1699 organic recycling
- 2.1700 post-consumer
- 2.1701 pre-consumer
- 2.1702 purge material
- 2.1703 recovered material
- 2.1704 recovery
- 2.1705 recyclate
- 2.1706 recycling
- 2.1707 regrind
- 2.1708 re-use, noun
- 2.1709 shredding
- 2.1710 waste
- 2.1712 activated sludge
- 2.1716 apprentice installer
- 2.1719 average cooling rate (non-linear)
- 2.1720 average molecular mass
- 2.1723 biochemical oxygen demand, BOD
- 2.1726 biodegradation phase
- 2.1727 biological treatability
- 2.1728 bulk wave
- 2.1729 cavity
- 2.1730 cavity pressure at hold
- 2.1733 compact tensile specimen
- 2.1734 complete break
- 2.1735 compost
- 2.1736 compostability
- 2.1737 composting
- 2.1743 contact force
- 2.1746 constant cooling rate
- 2.1747 cooling time
- 2.1748 critical cross-sectional area
- 2.1749 cutting depth
- 2.1750 cutting speed
- 2.1751 cycle time
- 2.1752 cycloolefin copolymer
- 2.1753 demoulding temperature
- 2.1754 design
- 2.1755 digested sludge
- 2.1757 disintegration
- 2.1758 dissolved inorganic carbon, DIC
- 2.1759 dissolved organic carbon, DOC
- 2.1761 dry mass
- 2.1763 dry-as-moulded (DAM) state
- 2.1764 durometer hardness
- 2.1767 eco-profile
- 2.1769 edgewise position
- 2.1772 environmental provision
- 2.1775 extensometer
- 2.1781 flakes, spalling
- 2.1783 flatwise position
- 2.1784 flexural-creep strain
- 2.1785 force-deflection diagram
- 2.1786 force-time diagram
- 2.1789 hinge break
- 2.1790 hold pressure
- 2.1791 hold time
- 2.1794 injection time
- 2.1795 injection velocity
- 2.1800 ISO mould
- 2.1801 lag phase
- 2.1802 life cycle
- 2.1803 life cycle assessment, LCA
- 2.1805 longitudinal acoustic wave
- 2.1806 locking force
- 2.1807 major load
- 2.1811 maturity of compost
- 2.1812 maximum force
- 2.1813 maximum level of biodegradation
- 2.1814 mesophilic incubation period
- 2.1815 minor load
- 2.1817 moist state, moist
- 2.1818 molecular mass
- 2.1820 nominal tensile-creep modulus
- 2.1821 nominal tensile-creep strain
- 2.1821 nominal tensile-creep strain
- 2.1822 non-break
- 2.1825 partial break
- 2.1826 pit
- 2.1827 plateau phase
- 2.1828 ploughing
- 2.1829 poly(cyclohexylenedimethylene terephthalate),PCT
- 2.1830 poly(butylene naphthalate), PBN
- 2.1831 poly(ethylene naphthalate), PEN
- 2.1832 poly(trimethylene terephthalate), PTT
- 2.1834 polycycloolefin
- 2.1837 polysulfone, PSU
- 2.1838 pre-conditioning
- 2.1839 pre-exposure
- 2.1840 prestress
- 2.1841 primary anaerobic biodegradation
- 2.1842 product standard
- 2.1843 protuberances
- 2.1845 Rockwell hardness
- 2.1846 scoring
- 2.1847 scratch, noun
- 2.1848 scratch distance
- 2.1849 scratch force
- 2.1850 scratch map
- 2.1855 single-edge-notched tensile, SENT specimen
- 2.1856 site quality assurance programme
- 2.1858 size-exclusion chromatography, SEC, gel-permeation chromatography, GPC
- 2.1859 skin, noun
- 2.1860 sonic-pulse propagation method
- 2.1865 test load
- 2.1866 theoretical amount of evolved biogas, Thbiogas
- 2.1867 theoretical amount of evolved carbon dioxide, ThCO2
- 2.1868 theoretical amount of evolved methane, ThCH4
- 2.1869 theoretical oxygen demand, ThOD
- 2.1870 thermophilic incubation period
- 2.1871 thickness
- 2.1872 total dry solids content
- 2.1873 total luminous transmittance
- 2.1875 total organic carbon, TOC
- 2.1877 total spectral transmittance
- 2.1879 transparent plastic
- 2.1880 true strain
- 2.1881 type of scratch behaviour
- 2.1883 ultimate aerobic biodegradation
- 2.1889 volatile-solids content
- 2.1892 water-holding capacity
- 2.1893 waves
- 2.1895 wedge formation
- 2.1899 Z twist or S twist
- 2.1908 plastics product
- 2.1911 single filament yarn
- 2.1923 annealing (2.1923)
- 2.1924 deflection (2.1924)
- 2.1925 energy (2.1925)
- 2.1926 verification of an instrument (2.1926)
- 2.1927 crack length (2.1927)
- 2.1928 crack (2.1928)
- 3.1 ageing
- 3.1 ageing
- 3.2 chlorinated poly(vinyl chloride), PVC-C
- 3.2 chlorinated poly(vinyl chloride) PVC-C
- 3.3 compressive strength
- 3.3 compressive strength
- 3.4 critical energy release rate
- 3.5 critical stress intensity factor
- 3.6 dammar resin
- 3.7 degate,
- 3.8 degree of polymerization
- 3.9 gate
- 3.10 laminate,
- 3.11 Poisson's ratio
- 3.12 polyolefin
- 3.13 pot life
- 3.14 resin transfer moulding RTM
- 3.15 submarine gate tunnel gate
- 3.16 unplasticized poly(vinyl chloride) PVC-U
- 3.17 volume resistivity
- 3.18 anisotropic
- 3.19 cavity pressure
- 3.20 control
- 3.21 electroformed mould
- 3.22 family mould
- 3.23 flat wise
- 3.24 hand lay up
- 3.25 impregnate,
- 3.26 interpenetrating polymer network IPN
- 3.27 liquid crystalline polymer LCP
- 3.28 miscibility
- 3.29 polycondensation
- 3.30 polymer blend
- 3.31 polymer gel
- 3.32 semi-interpenetrating polymer network SIPN
- 3.33 S-glass
- 3.34 ultimate anaerobic biodegradation
- 3.35 unidirectional laminate
- 3.36 wet out
- 3.37 defin,
- 3.38 transfer moulding
- 3.39 unsaturated polyester resin
- 3.40 feed
- 3.41 alloy
- 3.42 antistatic agent
- 3.43 chain length
- 3.44 comb chain
- 3.45 comb polymer
- 3.46 constitutional repeating unit
- 3.47 constitutional unit
- 3.48 damping
- 3.49 double-strand chain
- 3.50 double-strand polymer
- 3.51 dynamic stress
- 3.52 expandable plastic
- 3.53 internal plasticizer flexibilizer
- 3.54 ionomer
- 3.55 isotactic polymer
- 3.56 ladder polymer
- 3.57 long chain polymer
- 3.58 main chain backbone
- 3.59 plastic deformation
- 3.60 plasticate,
- 3.61 polyester
- 3.62 polymer
- 3.63 poromeric
- 3.64 reinforced plastic
- 3.65 short-chain branch
- 3.66 strain amplitude
- 3.67 test atmosphere
- 3.68 toughness
- 3.69 urea-formaldehyde resin
- 3.70 irradiance
- 3.71 global solar irradiance
- 3.72 spectral irradiance
- 3.73 radiant exposure
- 3.74 diffuse solar radiation
- 3.75 direct radiation direct solar radiation direct beam radiation
- 3.76 direct normal solar radiation
- 3.77 test specimen
- 3.78 replicate specimen
- 3.79 conditioning atmosphere
‹
Report an error
2.1476 displacement
<fracture toughness testing> distance through which the loading device moves, corrected for the indentation of the loading pins, the compression of the test specimen and the machine compliance
Note 1 to entry: It is expressed in metres.
2.1476 posunutí
<zkoušky lomové houževnatosti> vzdálenost, přes kterou se pohybuje zatěžovací zařízení, korigovaná na vtlačení zatěžovacích kolíků, stlačení zkušebního tělesa a poddajnost stroje
POZNÁMKA 1 k heslu Vyjadřuje se v metrech.