Your location: Home » CSN Terminology database » ČSN EN 13318 - Levelling layer

ČSN EN 13318 - Potěrové materiály a podlahové potěry - Definice

Download standard:	ČSN EN 13318 (Show details) Customers who have agreed on their computer from ÚNMZ service CSN on-line-for electronic access to the full texts of standards in pdf (version for companies or individuals) may open directly quoted CSN here.
Published:	2001-07-01
Classification symbol:	722480
Category:	Malty, maltové směsi, potěry
ICS:	01.040.91 - Stavební materiály a stavby (názvosloví) 91.060.30 - Stropy. Podlahy. Schodiště 91.100.10 - Cement. Sádra. Vápno. Malta
Status:	Valid

2.1 Base
2.2 Screed
2.3 Bitumen emulsion cement screed
2.4 Cementitious screed
2.5 Polymer modified cementitious screed
2.6 Magnesite screed
2.7 Synthetic resin screed
2.8 Calcium sulfate screed
2.9 Mastic Asphalt screed
2.10 Cementitious hard aggregate screed
2.11 Hard aggregate wearing screed
2.12 Lightweight screed
2.13 Flooring
2.14 Synthetic resin
3 Materials - Products
3.1 Screed material
3.2 Aggregate
3.4 Admixture
3.5 Air entraining admixture
3.6 Plasticizing admixture
3.7 Superplasticizing admixture
3.8 Set retarding admixture
3.9 Additive
3.10 Reinforcement
3.11 Insulating material
3.12 Curing compound
3.13 Bonding agent
3.14 Lightweight aggregate
4.1 Monolithic screed
4.2 Bonded screed
4.3 Unbonded screed
4.4 Floating screed
4.5 Screed laid on a separation layer
4.6 Precast tile or slab flooring
4.7 Reinforced screed
4.8 Heated screed
4.9 In-situ screed
5 Characteristics of screed material
5.1 Semi-dry
5.2 Flowing screed
5.3 Self-smoothing
5.4 Self-levelling
5.5 Working time
5.6 Pot life (for resin)
5.7 Water:binder ratio
5.8 Consistence
5.9 Time before trafficking
6 Characteristics of screed as Laid
6.1 Flatness
6.2 Levelness
6.3 Screed laids to falls
6.4 Abrasion resistance
6.5 Scratch resistance
6.6 Surface hardness
6.7 Bond strength
6.8 Surface tensile strength
6.9 In situ crushing resistance
6.10 Resistance to indentation
6.11 Electrical conductivity
6.12 Porosity
6.13 Laitance
6.14 Dusting
6.15 Crazing
6.16 Saponification
6.17 Efflorence
6.18 Curling
6.19 Arching
6.20 Roughness
6.21 Compaction
6.22 Monolithic
6.23 Resistance to rolling wheel
6.24 Crackbridging
6.25 Thermal compatibility
6.26 Slip resistance
6.27 Skid resistance
7 Construction Features
7.1 Joint
7.2 Construction joint
7.3 Induced contraction joint
7.4 Movement joints
7.5 Perimeter joint
7.6 Perimeter isolating strips
7.7 Bay
7.8 Vapour barrier
7.9 Dampf-proof membrane
8 Construction Elements
8.1 Separating layer
8.2 Wearing layer
8.3 Levelling layer
8.4 Underlayement
8.5 Underfloor heating system
8.6 Impregnation
8.7 Bonding layer
9 Construction – Finishing
9.1 Screeding
9.2 Trowelling
9.3 Grinding
9.4 Polishing
9.5 Dry shake application
10 Miscellaneous
10.1 Self weight
10.2 Imposed load
10.3 Datum level
10.4 Local repair
10.5 Core
10.6 Plate sample

Standard terminology

‹

Report an error

8.3 Levelling layer

Layer applied to compensate for unevenness and differences in height in the base or to accomodate services.

8.3 Vyrovnávací vrstva

Vrstva sloužící k vyrovnání ne-rovností a výškových rozdílů v podkladu nebo kolem potrubí.