ČSN EN ISO 12718 - Nedestruktivní zkoušení – Zkoušení vířivými proudy – Terminologie
| Stáhnout normu: | ČSN EN ISO 12718 (Zobrazit podrobnosti) Zákazníci, kteří mají na svém počítači sjednanou od České agentury pro standardizaci (ČAS) službu ČSN on-line pro elektronický přístup do plných textů norem v pdf (verzi pro firmy nebo pro jednotlivce), mohou zde přímo otevírat citované ČSN. |
| Datum vydání/vložení: | 2009-04-01 |
| Zdroj: | https://www.iso.org/obp/ui/#iso:std:iso:12718:ed-1:v1:en |
| Třidící znak: | 015005 |
| Obor: | Všeobecné zkušební metody (pro víceúčelové použití) |
| ICS: |
|
| Stav: | Neplatná |
- 2.1 background noise
- 2.2 balance
- 2.3 bandwidth
- 2.4 bucking signal
- 2.5 characteristic frequency
- 2.6 characteristic frequency ratio
- 2.7 coupling factor
- 2.8 demodulated signal
- 2.9 differentiated signal
- 2.10 eddy current distribution
- 2.11 eddy current testing
- 2.12 eddy currents
- 2.13 effective depth of penetration
- 2.14 effective permeability
- 2.15 electromagnetic coupling
- 2.16 electromagnetic testing
- 2.17 excitation current
- 2.18 excitation frequency
- 2.19 excitation
- 2.20 impedance plane diagram
- 2.21 in-phase demodulation
- 2.22 instrument noise
- 2.23 interference noise
- 2.24 law of similarity
- 2.25 loaded coil impedance
- 2.26 noise
- 2.27 normalized impedance plane diagram
- 2.28 normalized reactance
- 2.29 normalized resistance
- 2.30 phase angle of a signal
- 2.31 phase reference
- 2.32 pulsed eddy currents
- 2.33 quadrature demodulation
- 2.34 resultant magnetic field
- 2.35 signature
- 2.36 skin effect
- 2.37 standard depth of penetration
- 2.38 synchronous demodulation
- 2.39 unloaded impedance
- 3.1 absolute measurement
- 3.2 absolute signal
- 3.3 absolute value
- 3.4 comparative measurement
- 3.5 comparative measurement with external reference
- 3.6 comparative measurement with local reference
- 3.7 comparative signal
- 3.8 differential measurement
- 3.9 differential signal
- 3.10 differential value
- 3.11 double differential measurement
- 3.12 pseudodifferential measurement
- 4.1 absolute arrangement
- 4.2 absolute probe
- 4.3 additive magnetic flux probe
- 4.4 air cored probe
- 4.5 angular sensitivity
- 4.6 arrangement
- 4.7 array probe
- 4.8 coaxial probe
- 4.9 4.9.1 coil fill factor
- 4.9.2 coil fill factor
- 4.10 coil length
- 4.11 coil separation
- 4.12 coil spacing
- 4.13 coil turns
- 4.14 coil winding
- 4.15 combined transmit-receive probe
- 4.16 comparative arrangement
- 4.17 comparator probe
- 4.18 compensation coil
- 4.19 core
- 4.20 current driven excitation
- 4.21 differential arrangement
- 4.22 differential probe
- 4.23 double differential probe
- 4.24 effective coil diameter
- 4.25 electrical centre
- 4.26 encircling coil
- 4.27 excitation field
- 4.28 ferrite
- 4.29 ferromagnetic cored probe
- 4.30 focussing probe
- 4.31 flux gate sensor
- 4.32 giant magnetoresistive sensor
- 4.33 Hall effect sensor
- 4.34 inductive sensor
- 4.35 internal coaxial probe
- 4.36 internal sensor
- 4.37 magnetoresistive sensor
- 4.38 multielement probe
- 4.39 permanent magnet probe
- 4.40 primary coil
- 4.41 probe
- 4.42 probe array
- 4.43 4.43.1 probe fill factor
- 4.43.2 probe fill factor
- 4.44 probe position mark
- 4.45 pseudodifferential probe
- 4.46 reference probe
- 4.47 reflection assembly
- 4.48 rotating probe
- 4.49 screen
- 4.50 secondary coil
- 4.51 secondary field
- 4.52 segmental probe
- 4.53 separate transmit-receive probe
- 4.54 shielded probe
- 4.55 split coil probe
- 4.56 SQUID sensor
- 4.57 subtractive magnetic flux probe
- 4.58 surface probe
- 4.59 T-probe
- 4.60 transmission assembly
- 4.61 voltage-driven excitation
- 4.62 yoked coil
- 4.63 zone of influence of the probe
- 4.64 zone of interaction
- 5.1 absolute system
- 5.2 band pass filter
- 5.3 band stop filter
- 5.4 comparative system
- 5.5 complex plane display
- 5.6 component/time display
- 5.7 demagnetization unit
- 5.8 demodulator
- 5.9 differential filter
- 5.10 differential system
- 5.11 display area
- 5.12 eddy current instrument
- 5.13 eddy current testing system
- 5.14 excitation power amplifier
- 5.15 filter
- 5.16 gate
- 5.17 generator unit
- 5.18 high-pass filter
- 5.19 integrator
- 5.20 low-pass filter
- 5.21 measurement channel
- 5.22 measurement unit
- 5.23 multichannel instrument
- 5.24 multifrequency instrument
- 5.25 multiparameter instrument
- 5.26 path-synchronous display
- 5.27 phase shifter
- 5.28 probe pusher-puller unit
- 5.29 rotating head
- 5.30 saturation coil
- 5.31 saturation unit
- 5.32 signal amplifier
- 5.33 single channel instrument
- 5.34 single frequency instrument
- 5.35 single parameter instrument
- 5.36 time-synchronous display
- 5.37 window
- 6.1 approach technique
- 6.2 area of coverage
- 6.3 balanced bridge technique
- 6.4 drag effect
- 6.5 dynamic currents
- 6.6 dynamic measurement
- 6.7 edge effect
- 6.8 end effect
- 6.9 geometric effect
- 6.10 incremental permeability technique
- 6.11 input effect
- 6.12 length of coverage
- 6.13 lift off
- 6.14 material effect
- 6.15 multifrequency examination
- 6.16 multifrequency technique
- 6.17 multiparameter examination
- 6.18 multiparameter technique
- 6.19 multifrequency combination
- 6.20 operating point
- 6.21 output effect
- 6.22 phase setting
- 6.23 point of return technique
- 6.24 probe clearance
- 6.25 pulse technique
- 6.26 reflection technique
- 6.27 remote field technique
- 6.28 rotating field technique
- 6.29 scanning path
- 6.30 scanning plan
- 6.31 signal locus
- 6.32 single frequency examination
- 6.33 single frequency technique
- 6.34 single parameter examination
- 6.35 single parameter technique
- 6.36 sorting class
- 6.37 static measurement
- 6.38 surface speed
- 6.39 test parameters
- 6.40 testing configuration
- 6.41 throughput speed
- 6.42 tilt effect
- 6.43 transmission technique
- 6.44 width of coverage
- 6.45 wobble
- 7.1 amplitude analysis
- 7.2 analysis of signal dynamics
- 7.3 complex plane analysis
- 7.4 component analysis
- 7.5 dynamic analysis
- 7.6 elliptical display method
- 7.7 gating technique
- 7.8 group analysis
- 7.9 harmonic analysis
- 7.10 modulation analysis
- 7.11 phase analysis
- 7.12 regression analysis
- 7.13 sectorial analysis
- 7.14 static analysis
‹
Nahlásit chybu
4.10 coil length
axial lenght of a coil
4.10 délka cívky
délka cívky ve směru její osy